Hello Guyz Im Tanmay Currently Running cynus t2 rom on canvas 2 a110
If ur device is running Mobistel cynus T2 rom and after lots of try u r unable to root it, well hard luck though
After almost 1 month of struggle to root this rom using Sp Flash Tool i m here to say Its impossible
SO, there is a way out to get your device again rooted.
I ve managed to install official MCCX ICS 4.0.4 rom n flashed it using SP FLASH TOOL.
To Proceed u must have inter net connection with windows 8 64 bit because i have tested on it. not so sure about other os.
1. download official stock rom from here "http://d-h.st/NOR". If have skip step.
2. uninstall all mobistel cynus t2 drivers/ pre loader drivers .
3. open control panel in win 8 the metro Ui one not classic one.I think u all might be knowing how to go there.
There click on general tab then click- advanced startup n press restart.
then go to troubleshoot option n press option 7 i.e disable driver signature. Thats the most Important step.
4. Ur pc will get restarted n u ll enter in the in that option.
5. ur UAC User Account Control must be enabled atleast to the recommended level/2nd one from the top.
6. connect ur phone to usb and install mobistel cynus t2 drivers according to ur architecture . the windows will ask u to install drivers in red box.
Press yes. it will be pomp for 3 times all the times press yes.It must be pomp up in red box REMEMBER THAT. if not try x86 drivers.
7.Its time to play.
8. time to install PreLoader drivers. very important step open ur eyes n ears n follow the steps carefully. without it mobile wont flash.
9. switch off ur canvas 2 n remove the battery. remover for atleast 10 sec n then reinsert it.
10. open device manager. In switch off state connect ur phone there the device manager screen will flick and u will see under ports
Mobistel Cynus T2 Da Usb Vcom(3) or some thing like that. Hurry up as it will be visible for only 3 secs.
if its shows that means drivers are sucessfuly installed. For some users if there is pomp MT65xx like that then update drivers manually and browse under mobistel cynus T2 in programme files.
11. open/unrar spflash tool in folder Micromax A110 Stock Rom,Gude,Drivers & Tools. open it.
Load scatter file in folder "Micromax A110 Stock Rom,Gude,Drivers & Tools\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user (1)\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user\S9081 _MP_F4_B1_IN_MMX_0.09__flasher_user" NAMED "MT6577_Android_scatter_emmc"
12. Tick all options including recovery.
Press Firmware->upgrade, need not to press download, then at that moment connect canvas 2 in switched off state with battery.
First u will see red ring completes to 100% n further phone will restart. dont panic or dont try to remove usb as it may lead to brick.
remove only when sptool shows error. The error can be 4050 or 8100.
after red ring there will be voilet ring then grey then yellow in last the green ring
Ufff Thats it phone has been flashed. remove battery n press power u r having original micromax ICs stock rom.
:victory:
13. in last use binary tool to root canvas 2 n install CWM recovery n plz install Only pre rooted roms.
the best rom is JellyDream By dark4droid available in Xda site.
I M NOT RESPONSIBLE IF U BRICK UR PHONE. ALL THE PROCESS IS CARRIED IN A SAFE PROCESS AND IS SUCCESSFUL.
THANX TO SOME PEOPLE "DARK4DROID", "TECHIZIES", "lopestom", "mmxa110user" FOR KEEPING ME UP.
IF U LIKE MY WORK PLZ HIT THANX.
IF ANY HELP PLZ POST SUGGESTIONS
If ur device is running Mobistel cynus T2 rom and after lots of try u r unable to root it, well hard luck though
After almost 1 month of struggle to root this rom using Sp Flash Tool i m here to say Its impossible
SO, there is a way out to get your device again rooted.
I ve managed to install official MCCX ICS 4.0.4 rom n flashed it using SP FLASH TOOL.
To Proceed u must have inter net connection with windows 8 64 bit because i have tested on it. not so sure about other os.
1. download official stock rom from here "http://d-h.st/NOR". If have skip step.
2. uninstall all mobistel cynus t2 drivers/ pre loader drivers .
3. open control panel in win 8 the metro Ui one not classic one.I think u all might be knowing how to go there.
There click on general tab then click- advanced startup n press restart.
then go to troubleshoot option n press option 7 i.e disable driver signature. Thats the most Important step.
4. Ur pc will get restarted n u ll enter in the in that option.
5. ur UAC User Account Control must be enabled atleast to the recommended level/2nd one from the top.
6. connect ur phone to usb and install mobistel cynus t2 drivers according to ur architecture . the windows will ask u to install drivers in red box.
Press yes. it will be pomp for 3 times all the times press yes.It must be pomp up in red box REMEMBER THAT. if not try x86 drivers.
7.Its time to play.
8. time to install PreLoader drivers. very important step open ur eyes n ears n follow the steps carefully. without it mobile wont flash.
9. switch off ur canvas 2 n remove the battery. remover for atleast 10 sec n then reinsert it.
10. open device manager. In switch off state connect ur phone there the device manager screen will flick and u will see under ports
Mobistel Cynus T2 Da Usb Vcom(3) or some thing like that. Hurry up as it will be visible for only 3 secs.
if its shows that means drivers are sucessfuly installed. For some users if there is pomp MT65xx like that then update drivers manually and browse under mobistel cynus T2 in programme files.
11. open/unrar spflash tool in folder Micromax A110 Stock Rom,Gude,Drivers & Tools. open it.
Load scatter file in folder "Micromax A110 Stock Rom,Gude,Drivers & Tools\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user (1)\S9081_MP_F4_B1_IN_MMX_0.09__flasher_user\S9081 _MP_F4_B1_IN_MMX_0.09__flasher_user" NAMED "MT6577_Android_scatter_emmc"
12. Tick all options including recovery.
Press Firmware->upgrade, need not to press download, then at that moment connect canvas 2 in switched off state with battery.
First u will see red ring completes to 100% n further phone will restart. dont panic or dont try to remove usb as it may lead to brick.
remove only when sptool shows error. The error can be 4050 or 8100.
after red ring there will be voilet ring then grey then yellow in last the green ring
Ufff Thats it phone has been flashed. remove battery n press power u r having original micromax ICs stock rom.
:victory:
13. in last use binary tool to root canvas 2 n install CWM recovery n plz install Only pre rooted roms.
the best rom is JellyDream By dark4droid available in Xda site.
I M NOT RESPONSIBLE IF U BRICK UR PHONE. ALL THE PROCESS IS CARRIED IN A SAFE PROCESS AND IS SUCCESSFUL.
THANX TO SOME PEOPLE "DARK4DROID", "TECHIZIES", "lopestom", "mmxa110user" FOR KEEPING ME UP.
IF U LIKE MY WORK PLZ HIT THANX.
IF ANY HELP PLZ POST SUGGESTIONS